SchleTek Kraft Foam Cleaner removes almost all dirt from almost all surfaces. The cleaner forms an effective active foam that acts directly on the contamination. Read more
The foam just needs to be sprayed on. The foam cleaner then works independently and sucks up the dirt. This can be recognized by the discoloration that the foam takes on on the soiled surfaces. The cleaning effect can only be increased by spreading / incorporating with a brush on very uneven surfaces.
The foam cleaner can also be used overhead and is therefore popular, for example, for cleaning headliners in cars.
Blood remover
Blood stains on textiles or on wood and other absorbent surfaces are an insoluble problem for many cleaning agents. SchleTek's foam cleaner removes blood stains quickly and without leaving any residue. For this reason the SchleTek foam cleaner is also popular with hunters, for example. Blood from wild animals often gets onto textiles such as transport bags, cases or seat cushions. SchleTek's active foam is a perfect blood remover.
Insect remover
Insects that have dried up on license plates, headlights, motorcycle helmets, motorcycle jackets, etc., are often just as difficult to remove as blood stains. The Schletek active foam cleaner is also highly effective and gentle as an insect remover.
Nicotine remover
Nicotine is often a problem - on textiles as well as on other surfaces. One of the most impressive capabilities of the SchleTek foam cleaner is the extremely fast removal of nicotine stains. Because of its high cleaning power with nicotine, the active foam cleaner is often used as a nicotine cleaner, for example by window cleaners. Simply spray on and shortly afterwards the foam turns yellow-brown and has absorbed the nicotine. Then just wipe it off and the window frame is white again.
Application areas:
The active foam cleaner removes insects, oil stains, nicotine, silicone, tar, soot, etc. on textiles, plastics, metal, paints, etc. The area of application therefore ranges from upholstery, carpets, fabrics, tarpaulins, foils, tents, leather to car bodies and other painted surfaces. Therefore, this product is ideally suited for use in the interior of cars such as on the headliner, console, cockpit, interior trim, etc.
The foam cleaner also does a first-class job for office furniture and in the household on work surfaces, extractor hoods, on window frames, garden chairs, upholstery in the garden, rubber surfaces, synthetic leather seats, etc.
Application:
Simply spray the foam cleaner onto the surface to be cleaned (on very uneven surfaces, use a brush to spread / work in).
Then let the foam cleaner take effect. You can see very quickly how it changes color due to the dirt that has been sucked up.
Important: Since the foam cleaner soaks up the dirt, you have to lift the dirty foam off the surface, especially with textiles, without rubbing it. Otherwise you will rub in the dirt that is in the foam again! You can then repeat the process if necessary.
Use Kraft foam cleaner
Shake the can well before use. Spray Kraft foam cleaner onto the surface to be treated and let it work for a short time. After that, you can simply wipe the surface with a clean, dry cloth. In the case of stubborn dirt, you can rub the active foam cleaner with a soft brush and thus increase the cleaning power.
In the case of glued panels, it is advisable not to spray the cleaner directly onto the surface, but rather to apply it with a clean cloth and rub it off. A compatibility test on an inconspicuous area is also recommended for sensitive surfaces.
Contents: 500 ml
Labeling according to Regulation (EC) No. 1272/2008 [CLP / GHS]
- Signal word Danger
- EUH208 May produce an allergic reaction.
- Hazard warnings for health hazards
- H222 Extremely flammable aerosol.
- H229 Pressurized container: May burst if heated.
- safety instructions
- Prevention
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
- P211 Do not spray on an open flame or other ignition source
- P251 Do not pierce or burn, even after use.
- storage
- P410 + P412 Protect from direct sunlight. Do not expose to temperatures exceeding 50 ° C / 122 ° F