Olight Osight Red

The Osight introduces a groundbreaking magnetic charging system with a display that shows precise battery levels for both the charger and optics, eliminating uncertainty. This allows you to check the battery level of both the optics and the charging system at any time. Furthermore, this charger serves as protection for the optics when not in use. In addition, you can check the battery status with the three-color indicator on the optic. Both the charging system (800mAh) and the optics (170mAh) are powered by a high-capacity rechargeable battery. A fully charged charging system can charge the Osight three times with a low battery. The Osight has both a Motion and a Light sensor. The motion sensor automatically switches the optics off (after 10 minutes of inactivity) and on. The light sensor selects the best brightness based on the ambient lighting (10 daylight levels and 2 night levels). Furthermore, the brightness can also be selected manually if desired.

Red Dot:

MODE 12 / 333 Ua / 510.5 Hours

MODE 11 / 141.2 Ua / 1204.0 Hours

MODE 10 / 94.6 Ua / 1797.0 Hours

MODE 9 / 52.6 Ua / 3231.9 Hours

MODE 8 / 18.5 Ua / 9189.2 Hours

MODE 7 / 14.6 Ua / 11643.8 Hours

MODE 6 / 6.6 Ua / 25757.6 Hours

MODE 5 / 5.0 Ua / 34000.0 Hours

MODE 4 / 4.2 Ua / 40476.2 Hours

MODE 3 / 3.2 Ua / 53125.0 Hours

MODE 2 / 2.5 Ua / 68000.0 Hours

MODE 1 / 2.4 Ua / 70833.3 Hours

The optic has a 3 MOA point in a large window. With a 24mm x 21.5mm lens, the Osight ensures precise aiming, even with recoil. The 3 MOA dot stands out clearly for fast and accurate point determination. The optics can easily be zeroed with the supplied tool. By using the most common mounting (RMR: Ruggedized Miniature Reflex, 407c/507c footprint), the Osight ensures universality and ease of integration. Shock and water resistant (IPX6). Contains: Osight (including Charging Hood), USB-C Charging Cable, Cleaning Cloth, Adjustment Tool, Storage Bag, Screws and instruction manual. Optic dimensions: 29mm Wide x 32mm High x 44mm Deep *MODE 12: 395.3 Ua *BURN TIME 12: 430.1 Hours Following the successful launch of Olight's first red dot sight, which received a lot of attention and feedback, we took note of the prevailing comments about stability and zeroing with Osight. We have noted the common comments regarding stability and zeroing with Osight. It is crucial to emphasize the following points: Osight MUST be installed correctly by applying blue Loctite threadlocker to the screws provided AND torqueing each screw to 17 in/Lbs (1.9Nm). If an adapter plate is required, follow the manufacturer's installation instructions.