Stellar 3.0 SX60L Thermal Scope with Built-In LRF, 30mm Tube

The HikMicro Stellar 3.0 SX60L thermal imaging riflescope has a very low NETD (heat sensitivity) of only 18 mK. The lower the NETD value, the smaller the heat difference that the Stellar 3.0 can detect. With this low NETD of 18 mK, the HikMicro Stellar 3.0 SX60L registers even the smallest heat differences, which are then displayed on the OLED display with a resolution of 2560×2560 pixels with a good refresh rate of 25 Hz. The thermal imaging sensor that this Stellar 3.0 SX60L is equipped with has a resolution of 1080×1024 pixels and it has a pixel pitch of 12 µm, which means that the pixels are very close together. This Stellar 3.0 SX60L thermal imaging riflescope from HikMicro has a 60mm objective lens and has a very wide field of view of 25.6×20.5 meters at a distance of 100 meters.

This thermal imaging riflescope has a solid optical magnification of 3.6x, which can be zoomed in digitally for a maximum magnification of 26.6x. This makes it possible to get very close to the object to be observed. Thanks to the PIP (Picture in Picture) function, it is possible to make optimal use of this magnification without losing the overview. The various color modes that this Stellar 3.0 SX60L is rich in also contribute to the ease of observation in different circumstances. It has the following color modes:

• Black hot
• White hot
• Red hot
• Fusion
• Red monochrome
• Green monochrome

The HikMicro Stellar 3.0 SX60L has a recoil activation function and when this function is enabled the device will automatically make a short video as soon as it registers recoil. This makes it easy to record and review every shot. In addition, it is also possible to manually take photos or record videos -with audio- by using the buttons on the top of the housing. All photos and videos are stored on the internal memory of 64 GB. It is also possible to share files via Wi-Fi with a smartphone by using the Hotspot function. The HikMicro Stellar 3.0 SX60L thermal imaging riflescope has a stream function, which makes it possible to stream its feed live to a smartphone. This makes it easy to observe with multiple people.

The Stellar 3.0 thermal imaging riflescope looks traditional on the outside and it looks exactly like a conventional riflescope, but with all the handy functions of a thermal imaging riflescope. In addition to observing in the dark, for which the Stellar 3.0 is extremely suitable, it is also perfect for calculating the point of impact. The thermal imaging riflescope is equipped with a rangefinder (LRF, also known as laser rangefinder), which is located at the top of the lens. This rangefinder communicates directly with the internal ballistic calculator that this HikMicro Stellar 3.0 SX60L is equipped with. This ballistic calculator calculates the point of impact, based on the measured distance, which allows for a higher degree of accuracy.

The HikMicro Stellar 3.0 SX60L thermal imaging riflescope has a sturdy housing that can withstand a knock and it weighs 830 grams without the external battery. It uses two internal rechargeable Lithium batteries and one replaceable and rechargeable 18650 battery. Together, these batteries guarantee a battery life of nine hours. The housing has an IP67 waterproof certification, making it completely dust and waterproof. This thermal imaging riflescope can be submerged in water to a depth of one meter for up to 30 minutes.

Specifications HikMicro Stellar 3.0 SX60L

Sensor resolution (pixels) 1080×1024

Pixel pitch (µm) 12

Thermal sensitivity (NETD mK) ≤18

Optical magnification 2.5x

Digital magnification 2x, 3x, 4x, 5x, 6x, 7x, 8x, 9x, 10x, 11x

Objective diameter (mm) 60

Pipe diameter (mm) 30

Focus Adjustable objective

Display type OLED

Display resolution 2560×2560

Frame Rate (Hz) 25

Stream function Yes

Battery type 18650

Battery life 10 hours

IP code IP67

Dimensions (mm) 452.6×94.3×78.9 (l×w×h)

Weight (grams) 1000

Extras 2 batteries, Battery charger, Carrying case, Lens cloth, Lens cap, USB cable